SLS 3D Printed Formlabs Grey Nylon Mechanical Part with Tapping Holes
Posted on 2023-02-03 in Mechanics · 机械
Gallery
About Project
Balancing strength and detail, Nylon 12 is a highly capable material for both functional prototyping and end-use production of complex assemblies and durable parts with high environmental stability.
Solution
- Step 1: First, the 3D model will be broken down into layers of 0.1 mm on the computer and sent to the 3D printer.
- Step 2: Before printing, we need to fill the tank with SLS Polypropylene (PP) powders. On a bed pressure, a 0.1 mm thick layer over the whole width is applied.
- Step 3: Pre-heat the machine to above 100°C, and the laser will light the powder and increases the temperature just above the melting point of the powders.
- Step 4: After a layer is formed, the platform will lower down and produce another layer.
- Step 5: When the printing process ends, remove the excess powders which also serve as supports.