Gallery

About Project

For the consideration of property security, some shopping malls choose to display resin replicas of luxury brands, like this classical monogram bag. SLA resin can fully present exquisite patterns.

Solution

• Step 1: Check the model to make sure all the details have enough height and then add a vent hole on the bottom for the convenience of hollowing the model.
• Step 2: Arrange the bag models in software and add necessary supports inside and outside. Then 3D print them with SLA Generic Resin. The layer thickness we set is 0.05mm and we control the tolerance within 卤0.1 mm.
• Step 3: When printing is completed, rinse the models with IPA and post-cure them with UV. Cut off all the supports, then polish with sandpaper. Glue the vent hole part.
• Step 4: The white resin garage kits wait to be painted by experienced workers.