Gallery

About Project

We have printed these articulated Flexi dragon models with four different resin materials for testing and all of them perform well. The dragon beard and all the scales did not break.

Solution

• Step 1: The articulated model is downloaded from the Internet and our engineer would check the minimum details of these models, especially the interlocking structures.
• Step 2: Add supports and arrange the placement in the slicer software, then 3D print them with SLA Tough Resin, SLA Generic Resin, SLA Dark Tough, SLA Clear Resin.
• Step 3: Rinse with IPA and polish to remove the supports very carefully. Post-cure the dragon models with UV. Then polish to remove the marks.