Gallery

About Project

This handheld mist atomizer is specially designed for children by an industrial design student. The light green and blue-green colors would help to calm down the children. On the front side, it has a groove pattern so children could grab it firmly.

Solution

• Step 1: The client builds the model in CAD, and exports the STL files for printing. Our engineer would help her examine the model and split it into parts for the convenience of printing and painting.
• Step 2: We arrange the parts in software and add necessary supports. Then 3D print them with SLA Tough Resin. The layer thickness we set is 0.05mm and we control the tolerance within 卤0.1 mm.
• Step 3: When printing is completed, rinse the models with IPA and post-cure them with UV. Cut off all the supports and marks with scissors and graters, then polish with sandpaper. Try to assemble all the parts.
• Step 4: Spray with putties and paint the parts with airbrushes, then coat with clear acrylic oil. The coating layer should be thin and even so the assembly accuracy won’t be affected.