Gallery

About Project

As an industrial IoT platform, COSMOPlat, boasts of independent intellectual property rights in China and full-process user engagement. Here are the present models for COSMOPlat’s new plant. With LED light stripes inlaid, it looks as it was floating at night.

Solution

• Step 1: Examine the 3D model sent from the client, and raise suggestions like thicken the pillars, amend the broken meshes, add the depth of the vent, etc.
• Step 2: Hollow the models to decrease the materials so as to cut down the cost. Split them into different units for simpler post-process. Add supports and arrange the placement on slicing software.
• Step 3: 3D print the models with SLA Generic Resin using our industrial 3D printer. The layer thickness we set is 0.05mm.
• Step 4: Rinse the model with IPA and post-cure with UV. Cut off all the supports, then polish with sandpaper.
• Step 5: Spray all the parts with white and blue paints. Finally, pack them all together and the client can easily connect them with glue.