SLA 3D Printed Pikachu Smart AI Robot Enclosure Prototype
Posted on 2020-01-20 in Electronics 路 鐢靛瓙
Process 3D Print, Support Removal, Post Curing, Primer Coating, Polish, Paint
Material Resin
Quantity 1 pcs
Price Range $100-1,000
Lead Time 6 workdays
Material Resin
Quantity 1 pcs
Price Range $100-1,000
Lead Time 6 workdays
Gallery
About Project
Among various kinds of robots, the one with a Pikachu enclosure can easily attract children's attention. The shape and pattern of smart robots are also part of the differentiation in the market. This is where 3D printing can help. With low cost and short lead time, 3D printing can help you produce prototypes with large convenience.
Solution
- Step 1: As required, the robot should be seamless from the front and back sides, so the cover is designed on the bottom. We check the model to make sure it can be assembled.
- Step 2: Arrange the placement and add supports to the parts. 3D print them with SLA printing technology using SLA Durable Resin.
- Step 3: During post-processing, the supports inside the enclosure is a bit difficult to remove.
- Step 4: Our experienced painters color it according to the renderings.
