SLS 3D Printed Stainless Steel Components with Six Axial Passages

SLS 3D Printed Stainless Steel Components with Six Axial Passages

facfox-case-study
Process 3D Print, Post Curing
Material Metal
Quantity 50 pcs
Price Range $100-1,000
Lead Time 4 workdays

Gallery

About Project

These stainless steel components combine a larger recessed opening on one end with a smaller central bore on the other. Six smaller through-holes run parallel to the central axis. The geometry can support fluid or pneumatic distribution, a compact piston block, or a locating sleeve or flange for routing multiple lines.

Challenge

A stepped central through-bore and six equally spaced axial holes share the same cylindrical body. The central bore needs a distinct shoulder, while the outer holes must remain open end to end and retain their position relative to the central axis. Printing orientation and access for powder removal matter alongside the final bore dimensions.

Solution

  • Step 1: Review the intended application, budget, and critical dimensions to select a stainless steel grade and determine which features may require machining.
  • Step 2: Check the central bore, the six axial through-holes, and the wall thickness between them. Define the datums for checking the bore and hole pattern.
  • Step 3: Select a build orientation that balances bore geometry, support access, and powder removal. Leave machining stock on critical surfaces where needed.
  • Step 4: Print the parts using metal powder bed fusion. Clear loose powder from all through-holes and remove external supports as applicable.
  • Step 5: Finish-machine critical bores or seating faces if required by the drawing, then deburr the hole entrances and clean the parts.
  • Step 6: Check bore diameters, step depth, hole positions, and passage clearance. Define any additional flow, pressure, or fit tests according to the final application.