SLA 3D Printed and Acrylic Painted Flower Rings
Posted on 2022-02-22 in Jewelry 路 鐝犲疂
Process 3D Print, Support Removal, Post Curing, Primer Coating, Polish, Paint
Material Resin
Quantity 5 pcs
Price Range $1-100
Lead Time 3 workdays
Material Resin
Quantity 5 pcs
Price Range $1-100
Lead Time 3 workdays
Gallery
About Project
As shown in the pictures, the rings are printed with a consumer-level SLA 3D printer by the designer and have obvious layer textures, because the set layer height is 0.1mm and she did not polish them carefully. After painting with acrylic paints, the resin rings look similar to clay rings.
Solution
- Step 1: The client built the rings with Nomad, and export the STL file for printing..
- Step 2: Arrange the parts in software and add necessary supports. Then 3D print them with SLA Generic Resin. The layer thickness she set is 0.1mm.
- Step 3: When printing is completed, rinse the rings with IPA and post-cure them with UV. Cut off all the supports, then color them with acrylic paints.
- Step 4: The client did not polish the rings so there are visible layer lines on them, but she is okay with the effect.
