Gallery

About Project

Anubis was a jackal-headed deity who presided over the embalming process and accompanied dead kings in the afterworld. Someone geniusly replaced the head of Anubis with his pet, a husky, which made it look funny. The ultra detail resin can well deliver the details of husky hair and small holes in the ear.

Solution

• Step 1: Examine the STL file and communicate with our client about his requirements. After both confirm the size, structure, material and finishing, we input the 3D model into the slicing software and add support structure.
• Step 2: As the client wants the dog hair and the letters on its back to be clear, so we 3D print the model in one piece with DLP Ultra Detail Resin, which can present all the details.
• Step 3: Take out the print and wash them with IPA to remove excess materials and supports. Sand and polish the print to remove marks and bumps. Then post-cure them with UV.