SLA 3D Printed Rabbit and Carrot Baby Kid Toy Prototype
Posted on 2022-04-14 in Ads 路 骞垮憡
Process 3D Print, Support Removal, Post Curing, Primer Coating, Polish, Paint
Material Resin
Quantity 1 pcs
Price Range $100-1,000
Lead Time 5 workdays
Material Resin
Quantity 1 pcs
Price Range $100-1,000
Lead Time 5 workdays
Gallery
About Project
A student has designed this rabbit and carrots toy for infants and young children. The carrot lead has a rectangle groove that could hold a card. The toy prototype is made with SLA generic resin that has a beautiful painting effect.
Solution
- Step 1: As the carrots need to be put in the base, and the leaves connect the carrots with a hinge structure, we need to thoroughly examine the models and make modifications.
- Step 2: We arrange the parts in software and add necessary supports. Then 3D print them with SLA Durable Resin. The layer thickness we set is 0.05mm and we control the tolerance within 卤0.1 mm.
- Step 3: When printing is completed, rinse the models with IPA and post-cure them with UV. Cut off all the supports, spray with putty, then polish with sandpaper. Try to fit the parts together.
- Step 4: Color the parts with matte paint according to the appointed Pantone colors, then assemble them.
