SLA ABS-like Resin
ABS like SLA resin which has accurate and durable features. It has outstanding machinability, which allows tapping and threading.
Max Build Size
Min Build Size
2 x 2 x 2 mm
Default Layer Height
Optional Layer Heights
0.05, 0.1 mm
±0.2% (with a lower limit of ±0.2 mm)
Up to 75 ℃
Available Post Process
Functional prototypes and end products,
Not Suitable For
Complex designs with intricate details
Need less part finishing time,easier post-curing
Material Spec Sheet
Stereolithography is used to build your design with this material.Starting from a 3D model, a model is built by cutting it into thin layers via specialized software.
A support structure is created, where needed, in order to deal with overhangs and cavities.
The process takes place in a large tank and begins when a layer of liquid polymer is spread over a platform. This machine then uses a computer controlled laser to draw the first layer onto the surface of a liquid polymer, which hardens where struck by the laser. The model is then lowered and the next layer is then drawn directly on top of the previous one. This is repeated until the model is finished. In this way, layer by layer, an object is “drawn” in the liquid by the beam, with the layers being consolidated throughout the process.
When the object is complete, it is raised out of the tank via the supporting platform – much like a submarine rising to the surface of the water – with the excess liquid flowing away. The supports are removed manually after the model is taken from the machine.