Gallery

About Project

This concept car could slay all people who have seen it! Excellent printing quality and outstanding painting skills are both extremely important for the perfect outcome.

Solution

• Step 1: As for such a display model, it’s suggested to be made with SLA technology. Simply split it into the shell and wheels after a thorough examination.
• Step 2: Arrange the parts in the software and add necessary supports. Then 3D print them with SLA ABS-like Resin in one piece. The layer thickness we set is 0.05mm and we control the tolerance within 卤0.1 mm.
• Step 3: When printing is completed, rinse the models with IPA and post-cure them with UV. Cut off all the supports and marks with scissors and graters, then polish with sandpaper. Spray the parts with putties to make the surface look better.
• Step 4: Paint the parts with airbrushes and wool brushes. The paint includes some glitter powder and we would apply with a thin layer of clear acrylic oil at the end. Assemble the parts and glue them together into one piece.