Gallery

About Project

A pub themed death, evil, and demon has ordered the bust sculptures of Anubis and Baphomet.
The sexy and shining demon sculptures, placed in the dim light, creating a dangerous flirting vibe.
Looking heavy and solemn, they are indeed hollow and printed in resin. As the sculptures are placed indoors, the resin material can guarantee their use for a long time.

Solution

• Step 1: Check the 3D models from the designer engaged by our clients. We mainly focus on its resolution, minimum layer thickness, wall thickness, and if there are any boundary edges, intersecting faces or other faults.
• Step 2: 3D print the bust sculptures in one piece with our industrial SLA 3D printer. We recommend using SLA Black Tough Resin which can build fine-detailed models with smooth surfaces.
• Step 3: Take out the prints and wash them with IPA to remove excess materials and supports. Sand and polish the prints to remove marks and bumps. Then post-cure them with UV.
• Step 4: Brush with black and gold paint. Apply with UV oil to make the models shinier.