SLA 3D Printed Pink and White Smart Robot Display Model

SLA 3D Printed Pink and White Smart Robot Display Model

facfox-case-study
Process 3D Print, Support Removal, Post Curing, Primer Coating, Polish, Paint
Material Resin
Quantity 1 pcs
Price Range $100-1,000
Lead Time 5 workdays

Gallery

About Project

Smart robot toys become adorable gifts for kids. The moveable ones are more expensive while the fixed ones are much more affordable. This one is desired for a wide range of children, and the prototype is made with SLA 3D printing technology.

Solution

  • Step 1: We check the model and suggest the client split the parts for a better display effect. The model was split into housings, bases, and a screen.
  • Step 2: We hollow the housings, then arrange all the parts in software and add necessary supports. Then 3D print them with SLA Generic Resin. The layer thickness we set is 0.05mm and we control the tolerance within ±0.1 mm.
  • Step 3: When printing is completed, rinse the models with IPA and post-cure them with UV. Cut off all the supports and marks with scissors and graters, then polish with sandpaper.
  • Step 4: Paint the parts with airbrushes, then cover them with a thin layer of matte acrylic oil. Attach the PVC stickers to the surface. Finally, assemble the parts together into one piece.


🎈 Holiday Notice: Customer service will pause from Oct.1 - Oct.7 for National Day Holiday!
Limited support and manufacturing are offered during this period, while shipping service is fully stopped. All services will resume on Oct.8.
6% OFF for Insta3DP orders! Coupon Code: insta3dpbeta2