cf24e5443548f1fbd4c9d13f05aab96f.jpg

Farsoon, Huaxiang & LEHVOSS Group additively manufacture safety goggles to fight COVID-19 AM Industry

by Medical

COVID-19 is a high infectivity virus that is mainly transmitted through droplets released into the air by coughing or sneezing. To prevent infection in highly contaminated hospital environments, medical workers who are in close contact with patients must wear personal protective equipment (PPE) including masks, gloves, and respiratory systems to prevent infections transmitted through the nose and mouth. In addition to the safety PPE equipment listed above, other critical protection equipment are safety goggles. These are just as important as masks in protecting medical personnel against infection.

066ee1a3771c364e591b09c2bd8edd9d.jpg

Poland-based VentilAid project 3D prints open-source ventilator AM Industry

by Medical

Engineers and designers from Poland-based Urbicum have banded together to launch the VentilAid project, an effort to design an open-source ventilator which can be reproduced using a 3D printer and an assembly of basic, easily accessible parts. The open-source ventilator is being designed to help medical professionals in the fight against the coronavirus pandemic in cases where more traditional hospital resources are limited or exhausted.

Mogassam Releases DentCase DLP 3D Printer at IDS 2019 – Technical Specifications

Mogassam Releases DentCase DLP 3D Printer at IDS 2019 – Technical Specifications

by Medical

Mogassam, a Delaware-based 3D printer manufacturer, has released DentCase, a DLP 3D printer designed for the dental industry. The system offers a complete workflow, with integrated dental CAM software and post-curing system. The machine is currently being showcased at the International Dental Show (IDS) 2019 in Cologne, which takes place from the 12th to the 16th March. Explaining its goals, the company has stated:

0d5bbee3d4b568891f4da2f6c97a8a67.jpg

Leitat presents first medically validated, industrialized 3D printed emergency respiration device* AM Industry

by Medical

The alliance (which our Spanish language sister website reported on just a few days ago) between the Consorci de la Zona Franca (CZFB), HP, Leitat (Technological Center) together with CatSalut, through the Consorci Sanitari de Terrassa (CST) and the Hospital Parc Taulí de Sabadell, have developed the first industrialized field 3D printed emergency respiration device* to support hospitals and ICUs. The device is a mechanical bag valve mask (BVM) that can be used for short term emergency ventilation of COVID-19 patients.

4227360522708d29d83d773e6c099a44.jpg

Canadian doctor 3D prints face shields for front-line medical workers AM Industry

by Medical

Dr. Tarek Loubani, a Canadian emergency room doctor, has taken it upon himself to produce 3D printed face shields for his fellow front-line medical workers across the country. This is not the first time that Dr. Loubani has used his interest in 3D printing for good: the doctor actually started a medical supplies charity in to provide low-cost medical devices and supplies to conflict zones, such as Gaza.

b67322c0d4343759eaf1944cf14a1c47.jpg

3D LifePrints closes £1.2 investment funding round to expand medical 3D printing business Medical

by Medical

The world of 3D printing doesn’t stop. In fact, if anything, it has accelerated. 3D LifePrints UK Ltd, one of the UK’s leading medical 3D printing organizations, has recently closed an investment round of £1.2M led by Fenwall Investments. The investment will be used to rapidly expand 3D LifePrints’ existing foothold in the UK’s medical sector and overseas and follows on from previous investment in 2017 and 2018.