Heidelberg Instruments, through the recently acquired Multiphoton Optics, presented the new two-photon polymerization MPO 100 3D printer, a multi-user tool that combines both the requirements of 3D lithography with resolutions in the 100 nm range and 3D microprinting with structure heights of over one centimeter, all in one device.
“The MPO 100 is a unique tool for microfabrication and achieves the highest resolution among additive manufacturing processes at 100 nanometers. Furthermore, the 1-10-100-1000 capability of the MPO 100 will enable users at universities, R&D institutions, as well as the industry and offer significant advantages for new developments in areas such as micro-optics, microfluidics, and biomedicine,” said Dr. Benedikt Stender of Multiphoton Optics GmbH, the subsidiary of Heidelberg Instruments where the development of the MPO 100 was carried out.
Manufacturing on Demand
The system by MultiPhoton Optics works with a laser wavelength in the green spectral range, which is ideally suited for the 3D structuring of typical photoresists. Furthermore, MPO 100 is optimized to use the hybrid polymers (ORMOCER®s), particularly important for various applications. In addition to sophisticated algorithms to maximize structure quality, the synchronized scanning system offers the possibility of stitching-free patterning. In addition, the nano- and micro-3D printer is currently the only tool in the market equipped with a flowbox that guarantees temperature stability of up to 0.1°C and thus provides the necessary stability for large-scale exposures. Application-specific writing modes enable customer-specific printing requirements and distinguish it as a multi-use tool.
“With the MPO 100, we have combined the strengths of both companies in one system: Multiphoton Optics’ sophisticated exposure unit for two-photon polymerization and Heidelberg Instruments’ industrial platform, which guarantees the required stability and meets the necessary industry standards. The capabilities of the MPO 100 are already very popular with our customers, who benefit from the worldwide support from our service organization and ISO-certified production,” said Steffen Diez, COO of Heidelberg Instruments.
You might also like:
Aurora Labs to show it meets aerospace standards for metal AM: Upon successful completion, this will enable A3D to be one of the first additive equipment companies compliant to print metal parts to these aerospace 3D printing standards, once approved. Globally, A3D will be the first to achieve this status at 1500W laser power.
* This article is reprinted from 3D Printing Media Network. If you are involved in infringement, please contact us to delete it.
Author: Davide Sher
Leave A Comment