Nexa3D, a maker of ultra-fast 3D printers, has released the NXE 200 industrial 3D printer, an affordable entryway into Lubricant Sublayer Photo-curing (LSPc) technology. The NXE 200 is a natural expansion of Nexa3D’s portfolio, which also currently includes the NXE 400 industrial 3D printer and NXD 200 dental 3D printer, with the intention of broadening LSPc’s accessibility.
Designers, engineers, and manufacturers who need fast, accurate, scalable prototyping and manufacturing solutions will benefit from the NXE 200. The system offers 6.5x the speed of competitive resin 3D printing technologies as well as a build volume of 8.5L, and a build area of 275 x 155 x 200mm. With this combination of speed and volume, users can produce large parts and production runs of smaller parts in a fraction of the time required by other 3D printers.
The NXE 200 printer
“Consumers should not have to accept tradeoffs between quality and affordability,” said Michele Marchesan, Nexa3D Chief Revenue Officer, Industrial Products. “The NXE 200 offers extremely high productivity, in addition to superior accuracy, aesthetics, and mechanical properties, at the lowest total cost of ownership. Nexa3D intends to reach as many users as possible, and the NXE 200 will make LSPc more widely available.”
Manufacturing on Demand
Nexa3D offers a large selection of materials for use with the NXE 200, along with its intuitive and user-friendly NexaX 2.0 software, which enables intelligent build optimization, process stability, and print consistency. Finished off using the xWash and xCure post-processing technology, each of these elements is fast and easy to use, eliminating wasted time in print preparation and post-processing.
The NXE 200 includes Nexa3D’s proprietary Everlast 2 membrane, a key component to LSPc’s speed and which, due to its long lifespan, results in more printer uptime and lower consumables costs. The printer’s 4K LCD light engine eliminates light diffusion near the part’s edges, resulting in exceptional accuracy and surface finish. Uniform exposure and process control with high power and irradiance enable a strong cure at each layer for better mechanical properties.
The NXE 200 is priced at $49,990, including installation and, until the end of May, the printer comes bundled with Nexa3D’s high-capacity xCure curing unit and NexaX 2.0 software.
Built from industrial hardware with modular components, the 3D printer is easy to service and affordable to upgrade, resulting in a long-lasting, reliable machine.
You might also like:
* This article is reprinted from 3D Printing Media Network. If you are involved in infringement, please contact us to delete it.
Author: Edward Wakefield
Leave A Comment