A simple glue stick can go a long way in improving bed adhesion. Check out the best glue sticks for 3D printing!
The first layer is without a doubt the most important layer in a 3D print, as it establishes the model’s base and connects it to the build surface. Unfortunately, that second point can be one of the biggest challenges of 3D printing. If the first layer isn’t well bonded to the build plate, your print may warp or completely fall apart.
Of all the different bed adhesion techniques out there, glue is perhaps the least expensive and easiest to use. Here, we’ve looked at a number of popular choices for glue sticks, so you can find the best tool for the task.
3D Printing First Layer Problems: How to Make It Perfect
Why a Glue Stick?
While there are many ways to ensure that your print sticks, like different build surfaces and adhesives, the humble glue stick is one of the most simple. Glue and similar adhesive substances offer a few benefits:
- Easy cleanup: Many glue sticks are water-soluble, allowing you to quickly rinse your build plate with water to remove any leftover or excess adhesive. Other adhesion solutions, like tape, tend to leave a residue that’s more difficult to remove.
- Easy application: Glue sticks are applied directly to the bed, meaning no sticky overspray as you might experience with spray adhesives. While tape also contacts the bed, it’s difficult to correctly align and apply the tape on the build plate in an even layer without air bubbles.
- Easy print removal: Unlike some other solutions, glue sticks don’t over-adhere models to the bed once it cools. Glue also comes in handy when printing certain materials, like PETG, which naturally have more adhesive properties. For these types of materials, glue serves as something of an interface layer, so the material doesn’t permanently stick to your build surface.
While glue is one way to solve adhesion, be mindful of other factors that affect bed adhesion, such as your bed levelness, Z offset value, and even the condition of your filament (like whether it has moisture in it). Also, make sure to wash your build plate after every few applications to ensure that the residue doesn’t solidify.
Elmer’s Disappearing Purple Glue Stick
One of the most prolific glue manufacturers around, Elmer’s has been formulating new glues for over 70 years. One of the most notable industries that the company supports is general education and schools.
This glue stick makes it to the top of the list for the color-changing effect that it has – it applies purple and then changes to clear once it dries. This is a serious help when it comes to ensuring effective coverage of your print bed. Furthermore, its harder consistency makes it easy to apply a thin coat.
Layerneer Bed Weld
Layerneer is a California-based company centered around their one and only product, Bed Weld. This adhesive solution was developed to enhance bed adhesion for PLA, ABS, ASA, PETG, CPE, and PVA filament materials. According to Layerneer, Bed Weld is water-soluble and low-odor, making cleanup super easy.
Layerneer’s Bed Weld is a special 3D printer adhesive that can be applied just like glue. The bottle features a foam tip that helps prevent over-application but still allows for direct contact.
As pointed out by multiple customer reviews, Bed Weld remains effective in keeping prints in place for a pretty long time. Also, this substance is said to adhere to surfaces when hot but release them when cold, similar to a textured glass bed, which is great for quickly removing parts.
Magigoo
Produced by the start-up Thought3D, Magigoo is a specially formulated adhesive intended for direct use in 3D printing. After several revisions, including a glue stick form, their current offering is a liquid in a stick deposited through a felt membrane. While the current version is not technically a glue stick in its traditional sense, the stick applicator is popular in the 3D printing community.
The consistency of the liquid is just right, applying incredibly smoothly. Also, since it’s for 3D printing, the glue deactivates once the heated print bed is cooled. The releasing action makes it a breeze to remove your 3D printed model once the job is done.
One other thing to note about Magigoo is that there are different products for different printing materials, meaning that you will have the right level of adhesion, whatever you’re printing with.
Scotch Purple Glue Stick
Scotch, a 3M brand, is well known for the transparent sticky tape first offered in the 1930s. Scotch is one of the industry leaders making tapes, glues, decorative items, and much more. The brand is so popular, it has become a household name in parts of the world and even generic clear tape bears the name of “Scotch tape”.
Similar to other glue sticks, this one applies easily, as it has more of a firm consistency. The added bonus is that, similar to Elmer’s glue stick offering, this one applies purple and dries clear, making it easier to tell if you missed a spot. Cleanup and reconditioning of a glass 3D print bed is a breeze with simple soap and water.
Stick Stick is another 3D printing-specific adhesive made by MatterHackers, a popular online retailer of 3D printing supplies. MatterHackers sells everything from nozzles and hot ends to entire printers and enclosures, offering various brands like Creality and LulzBot. MatterHackers also sells its own brand of products, including filaments and, of course, Stick Stick bed adhesive.
Stick Stick is great for 3D printing because you only need to apply a light layer of the substance on the build plate to get parts to stick. The Stick Stick bottle makes using the unique substance a breeze through the sponge applicator, which helps prevent putting too much down on the bed.
Stick Stick is also known to help prints stick when hot, but the bond weakens when cool, making part removal easy. Unfortunately, as pointed out in the description and tests by customers, it only works with PLA, PETG, and MatterHackers Pro Series Ryno (not ABS or nylon).
According to MatterHackers, the adhesive substance is odor-free and water-based, so you should be able to clean your bed with just warm water. However, it’s important to mention that some users found that water wasn’t doing the trick and recommend using IPA to clean off excess Stick Stick from the bed.
UHU Stic
UHU created the first batch of their famous all-purpose glue in 1931. It is made and owned by the German brand UHU as a part of the larger Bolton Adhesives company. Their glue is on the market as a general-purpose glue, useful for paper, cardboard, foams, and surprisingly, 3D printing.
One can count on a smooth application due to the soft consistency of this glue stick. Further, the grip gives you an accurate way to adjust the amount of glue exposed, and a convenient screw top lid ensures your glue will never dry out.
Source: https://all3dp.com/2/what-s-the-best-glue-stick-for-3d-printing/