{"id":192647,"date":"2022-09-08T00:00:00","date_gmt":"2022-09-08T00:00:00","guid":{"rendered":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/"},"modified":"2022-09-08T00:00:00","modified_gmt":"2022-09-08T00:00:00","slug":"cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials","status":"publish","type":"post","link":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/","title":{"rendered":"CuNi30 developed by 3D Systems in collaboration with HII Materials"},"content":{"rendered":"

3D Systems has developed CuNi30, a corrosion-resistant, copper-nickel alloy for use with its DMP Flex 350 metal 3D printer. This material resulted from the company\u2019s collaboration with HII\u2019s Newport News Shipbuilding division, which focused on developing materials and process parameters for laser powder bed fusion additive manufacturing. The companies\u2019 deep domain expertise facilitated the development of CuNi30 and is allowing Newport News Shipbuilding to use additive manufacturing in place of its traditional casting technologies. Direct metal printing part<\/a>s using CuNi30 to meet Newport News Shipbuilding\u2019s low-volume, high-mix hardware needs can improve supply chain efficiency \u2013 with an anticipated 75% reduction in lead times as well as lowered inventory costs.<\/p>\n

HII is an all-domain defense and technologies part<\/a>ner and is recognized as America\u2019s largest shipbuilder.<\/p>\n

Copper-nickel alloys are used extensively in salt water, petroleum, and acidic environment<\/a>s \u2013 due to the material\u2019s excellent corrosion resistance, and its anti-microbial and anti-algae properties that enable resistance to algae growth during extended exposure to water. CuNi30 is often used to manufacture pipe fittings and valves for the marine (e.g., shipbuilding and repair), offshore oil and gas, and chemical and nuclear industries. These alloys also possess stable mechanic<\/a>al, physical, and thermal properties (from 400\u00b0C down to -270\u00b0C) which make them suitable for cryogenic application<\/a>s. CuNi alloys are historically difficult to cast, which often adds costly cycles of rework and reinspection to meet quality standards. This leads to very long lead times and a limited number of capable and willing suppliers who can support the production of quality hardware. HII recognized the potential to realize significant benefits if the DMP hardware, material, and process could be qualified for their production components, and part<\/a>nered with 3D Systems to make this a reality.<\/p>\n

\n
\n

Manufacturing on Demand<\/h4>\n
Fast turnaround, low cost, comprehensive optimized strategy\u2026 FacFox is your one-stop partner for product manufacturing!\n<\/div>\n<\/div>\n

<\/i> Get Quote<\/a><\/div>\n

3D Systems\u2019 DMP Flex <\/p>\n

\u201c3D Systems has earned a reputation as a trusted part<\/a>ner for advanced R&D and commercialization of novel additive manufacturing materials and application<\/a>s,\u201d said Dr. Michael Shepard, vice president of the aerospace<\/a> and defense segment at 3D Systems. \u201cWe\u2019ve had a decades-long relationship with the U.S. Navy which has helped drive innovation for a variety of application<\/a>s including aircraft part<\/a>s and submersible components. Our latest project with Newport News Shipbuilding yielded a copper-nickel alloy specifically designed for AM that results in better part<\/a> density and mechanic<\/a>al properties as compared to traditional casting. We look forward to seeing how direct metal printing and CuNi30 will be able to accelerate Newport News Shipbuilding\u2019s production workflows and its innovation pipeline.\u201d<\/p>\n

\u201cWe\u2019re excited to announce the completion of a significant milestone in the development of a CuNi alloy with 3D Systems,\u201d said Dave Bolcar, vice president of engineering and design for Newport News Shipbuilding, a division of HII. \u201cEarlier this year we completed a multi-year effort with 3D Systems related to the research and development of a Corrosion Performance Design Guide for Direct Metal Printing of a nickel-based alloy. We\u2019re looking forward to continuing to expand our parameter development efforts with 3D Systems into other alloys of interest to our industry. These developments allow us to further expand the use of additive manufacturing into our platforms in ways that provide positive quality, schedule, and performance benefits to the customer.\u201d<\/p>\n

3D Systems intends to add CuNi30 to its materials portfolio to enable the direct metal printing of corrosion-resistant part<\/a>s for additional industries. The material is anticipated for general availability in the fourth quart<\/a>er of 2022.<\/p>\n

\n
You might also like:<\/h5>\n

Optomec and Acme Manufacturing showcase industry-first work cell: <\/a>The automated work cell has a repair capacity of 85,000 titanium compressor blades per year and provides a compelling ROI when compared to traditional CNC machines and manual TIG welding. Technologies used in the automated work cell are currently commercially available and have been certified by civil aviation authorities around the world.<\/p><\/blockquote>\n

* This article is reprinted from 3D Printing Media Network<\/a>. If you are involved in infringement, please contact us to delete it.<\/p>\n

<\/i> Author: Edward Wakefield<\/p>\n","protected":false},"excerpt":{"rendered":"

3D Systems has developed CuNi30, a corrosion-resistant, copper-nickel alloy for use with its DMP Flex 350 metal 3D printer. This material resulted from the company\u2019s collaboration with HII\u2019s Newport News Shipbuilding division, which focused on developing materials and process parameters for laser powder bed fusion additive manufacturing. The companies\u2019 deep domain expertise facilitated the development of CuNi30 and is allowing Newport News Shipbuilding to use additive manufacturing in place of its traditional casting technologies. Direct metal printing parts using CuNi30 to meet Newport News Shipbuilding\u2019s low-volume, high-mix hardware needs can improve supply chain efficiency \u2013 with an anticipated 75% reduction in lead times as well as lowered inventory costs.<\/p>\n","protected":false},"author":3,"featured_media":192649,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"fifu_image_url":"\/news\/wp-content\/uploads\/2023\/05\/8020687499939278152.jpg","fifu_image_alt":"","footnotes":""},"categories":[285],"tags":[4046,5033],"class_list":["post-192647","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-business","tag-acquisitions","tag-mergers-partnershipsmaritime-industrymaterialsmetals"],"yoast_head":"\nCuNi30 developed by 3D Systems in collaboration with HII Materials - FacFox News<\/title>\n<meta name=\"description\" content=\"3D Systems has developed CuNi30, a corrosion-resistant, copper-nickel alloy for use with its DMP Flex 350 metal 3D printer. This material resulted from the company\u2019s collaboration with HII\u2019s Newport News Shipbuilding division, which focused on developing materials and process parameters for laser powder bed fusion additive manufacturing. The companies\u2019 deep domain expertise facilitated the development of CuNi30 and is allowing Newport News Shipbuilding to use additive manufacturing in place of its traditional casting technologies. Direct metal printing parts using CuNi30 to meet Newport News Shipbuilding\u2019s low-volume, high-mix hardware needs can improve supply chain efficiency \u2013 with an anticipated 75% reduction in lead times as well as lowered inventory costs.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"CuNi30 developed by 3D Systems in collaboration with HII Materials\" \/>\n<meta property=\"og:description\" content=\"3D Systems has developed CuNi30, a corrosion-resistant, copper-nickel alloy for use with its DMP Flex 350 metal 3D printer. This material resulted from the company\u2019s collaboration with HII\u2019s Newport News Shipbuilding division, which focused on developing materials and process parameters for laser powder bed fusion additive manufacturing. The companies\u2019 deep domain expertise facilitated the development of CuNi30 and is allowing Newport News Shipbuilding to use additive manufacturing in place of its traditional casting technologies. Direct metal printing parts using CuNi30 to meet Newport News Shipbuilding\u2019s low-volume, high-mix hardware needs can improve supply chain efficiency \u2013 with an anticipated 75% reduction in lead times as well as lowered inventory costs.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/\" \/>\n<meta property=\"og:site_name\" content=\"FacFox News\" \/>\n<meta property=\"article:published_time\" content=\"2022-09-08T00:00:00+00:00\" \/>\n<meta property=\"og:image\" content=\"\/news\/wp-content\/uploads\/2023\/05\/8020687499939278152.jpg\" \/><meta property=\"og:image\" content=\"\/news\/wp-content\/uploads\/2023\/05\/8020687499939278152.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1\" \/>\n\t<meta property=\"og:image:height\" content=\"1\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Vera\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:image\" content=\"\/news\/wp-content\/uploads\/2023\/05\/8020687499939278152.jpg\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Vera\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/\"},\"author\":{\"name\":\"Vera\",\"@id\":\"https:\/\/facfox.com\/news\/#\/schema\/person\/7b701aad2d8f434034fcecd2c50a570c\"},\"headline\":\"CuNi30 developed by 3D Systems in collaboration with HII Materials\",\"datePublished\":\"2022-09-08T00:00:00+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/\"},\"wordCount\":685,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/facfox.com\/news\/#organization\"},\"image\":{\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2023\/05\/35e77f2d84c41a1905f68005f067c292.jpg\",\"keywords\":[\"Acquisitions\",\"Mergers & PartnershipsMaritime IndustryMaterialsMetals\"],\"articleSection\":[\"Business\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/\",\"url\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/\",\"name\":\"CuNi30 developed by 3D Systems in collaboration with HII Materials - FacFox News\",\"isPartOf\":{\"@id\":\"https:\/\/facfox.com\/news\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2023\/05\/35e77f2d84c41a1905f68005f067c292.jpg\",\"datePublished\":\"2022-09-08T00:00:00+00:00\",\"description\":\"3D Systems has developed CuNi30, a corrosion-resistant, copper-nickel alloy for use with its DMP Flex 350 metal 3D printer. This material resulted from the company\u2019s collaboration with HII\u2019s Newport News Shipbuilding division, which focused on developing materials and process parameters for laser powder bed fusion additive manufacturing. The companies\u2019 deep domain expertise facilitated the development of CuNi30 and is allowing Newport News Shipbuilding to use additive manufacturing in place of its traditional casting technologies. Direct metal printing parts using CuNi30 to meet Newport News Shipbuilding\u2019s low-volume, high-mix hardware needs can improve supply chain efficiency \u2013 with an anticipated 75% reduction in lead times as well as lowered inventory costs.\",\"breadcrumb\":{\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#primaryimage\",\"url\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2023\/05\/35e77f2d84c41a1905f68005f067c292.jpg\",\"contentUrl\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2023\/05\/35e77f2d84c41a1905f68005f067c292.jpg\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/facfox.com\/news\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"CuNi30 developed by 3D Systems in collaboration with HII Materials\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/facfox.com\/news\/#website\",\"url\":\"https:\/\/facfox.com\/news\/\",\"name\":\"FacFox News\",\"description\":\"News and Insights of 3D Printing and Manufacturing\",\"publisher\":{\"@id\":\"https:\/\/facfox.com\/news\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/facfox.com\/news\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/facfox.com\/news\/#organization\",\"name\":\"FacFox News\",\"url\":\"https:\/\/facfox.com\/news\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/facfox.com\/news\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2020\/11\/facfox-news-homepg-logo-200px.png\",\"contentUrl\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2020\/11\/facfox-news-homepg-logo-200px.png\",\"width\":200,\"height\":55,\"caption\":\"FacFox News\"},\"image\":{\"@id\":\"https:\/\/facfox.com\/news\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/facfox.com\/news\/#\/schema\/person\/7b701aad2d8f434034fcecd2c50a570c\",\"name\":\"Vera\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g\",\"caption\":\"Vera\"},\"url\":\"https:\/\/facfox.com\/news\/author\/vera\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"CuNi30 developed by 3D Systems in collaboration with HII Materials - FacFox News","description":"3D Systems has developed CuNi30, a corrosion-resistant, copper-nickel alloy for use with its DMP Flex 350 metal 3D printer. This material resulted from the company\u2019s collaboration with HII\u2019s Newport News Shipbuilding division, which focused on developing materials and process parameters for laser powder bed fusion additive manufacturing. The companies\u2019 deep domain expertise facilitated the development of CuNi30 and is allowing Newport News Shipbuilding to use additive manufacturing in place of its traditional casting technologies. Direct metal printing parts using CuNi30 to meet Newport News Shipbuilding\u2019s low-volume, high-mix hardware needs can improve supply chain efficiency \u2013 with an anticipated 75% reduction in lead times as well as lowered inventory costs.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/","og_locale":"en_US","og_type":"article","og_title":"CuNi30 developed by 3D Systems in collaboration with HII Materials","og_description":"3D Systems has developed CuNi30, a corrosion-resistant, copper-nickel alloy for use with its DMP Flex 350 metal 3D printer. This material resulted from the company\u2019s collaboration with HII\u2019s Newport News Shipbuilding division, which focused on developing materials and process parameters for laser powder bed fusion additive manufacturing. The companies\u2019 deep domain expertise facilitated the development of CuNi30 and is allowing Newport News Shipbuilding to use additive manufacturing in place of its traditional casting technologies. Direct metal printing parts using CuNi30 to meet Newport News Shipbuilding\u2019s low-volume, high-mix hardware needs can improve supply chain efficiency \u2013 with an anticipated 75% reduction in lead times as well as lowered inventory costs.","og_url":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/","og_site_name":"FacFox News","article_published_time":"2022-09-08T00:00:00+00:00","og_image":[{"url":"\/news\/wp-content\/uploads\/2023\/05\/8020687499939278152.jpg","type":"","width":"","height":""},{"url":"\/news\/wp-content\/uploads\/2023\/05\/8020687499939278152.jpg","width":1,"height":1,"type":"image\/jpeg"}],"author":"Vera","twitter_card":"summary_large_image","twitter_image":"\/news\/wp-content\/uploads\/2023\/05\/8020687499939278152.jpg","twitter_misc":{"Written by":"Vera","Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#article","isPartOf":{"@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/"},"author":{"name":"Vera","@id":"https:\/\/facfox.com\/news\/#\/schema\/person\/7b701aad2d8f434034fcecd2c50a570c"},"headline":"CuNi30 developed by 3D Systems in collaboration with HII Materials","datePublished":"2022-09-08T00:00:00+00:00","mainEntityOfPage":{"@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/"},"wordCount":685,"commentCount":0,"publisher":{"@id":"https:\/\/facfox.com\/news\/#organization"},"image":{"@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#primaryimage"},"thumbnailUrl":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2023\/05\/35e77f2d84c41a1905f68005f067c292.jpg","keywords":["Acquisitions","Mergers & PartnershipsMaritime IndustryMaterialsMetals"],"articleSection":["Business"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/","url":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/","name":"CuNi30 developed by 3D Systems in collaboration with HII Materials - FacFox News","isPartOf":{"@id":"https:\/\/facfox.com\/news\/#website"},"primaryImageOfPage":{"@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#primaryimage"},"image":{"@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#primaryimage"},"thumbnailUrl":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2023\/05\/35e77f2d84c41a1905f68005f067c292.jpg","datePublished":"2022-09-08T00:00:00+00:00","description":"3D Systems has developed CuNi30, a corrosion-resistant, copper-nickel alloy for use with its DMP Flex 350 metal 3D printer. This material resulted from the company\u2019s collaboration with HII\u2019s Newport News Shipbuilding division, which focused on developing materials and process parameters for laser powder bed fusion additive manufacturing. The companies\u2019 deep domain expertise facilitated the development of CuNi30 and is allowing Newport News Shipbuilding to use additive manufacturing in place of its traditional casting technologies. Direct metal printing parts using CuNi30 to meet Newport News Shipbuilding\u2019s low-volume, high-mix hardware needs can improve supply chain efficiency \u2013 with an anticipated 75% reduction in lead times as well as lowered inventory costs.","breadcrumb":{"@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#primaryimage","url":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2023\/05\/35e77f2d84c41a1905f68005f067c292.jpg","contentUrl":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2023\/05\/35e77f2d84c41a1905f68005f067c292.jpg"},{"@type":"BreadcrumbList","@id":"https:\/\/facfox.com\/news\/cuni30-developed-by-3d-systems-in-collaboration-with-hii-materials\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/facfox.com\/news\/"},{"@type":"ListItem","position":2,"name":"CuNi30 developed by 3D Systems in collaboration with HII Materials"}]},{"@type":"WebSite","@id":"https:\/\/facfox.com\/news\/#website","url":"https:\/\/facfox.com\/news\/","name":"FacFox News","description":"News and Insights of 3D Printing and Manufacturing","publisher":{"@id":"https:\/\/facfox.com\/news\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/facfox.com\/news\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/facfox.com\/news\/#organization","name":"FacFox News","url":"https:\/\/facfox.com\/news\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/facfox.com\/news\/#\/schema\/logo\/image\/","url":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2020\/11\/facfox-news-homepg-logo-200px.png","contentUrl":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2020\/11\/facfox-news-homepg-logo-200px.png","width":200,"height":55,"caption":"FacFox News"},"image":{"@id":"https:\/\/facfox.com\/news\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/facfox.com\/news\/#\/schema\/person\/7b701aad2d8f434034fcecd2c50a570c","name":"Vera","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g","caption":"Vera"},"url":"https:\/\/facfox.com\/news\/author\/vera\/"}]}},"fifu_image_url":"\/news\/wp-content\/uploads\/2023\/05\/8020687499939278152.jpg","_links":{"self":[{"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/posts\/192647","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/comments?post=192647"}],"version-history":[{"count":0,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/posts\/192647\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/media\/192649"}],"wp:attachment":[{"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/media?parent=192647"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/categories?post=192647"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/tags?post=192647"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}