{"id":181977,"date":"2021-08-19T08:52:54","date_gmt":"2021-08-19T08:52:54","guid":{"rendered":"http:\/\/facfox.com\/news\/?p=181977"},"modified":"2021-08-19T08:52:54","modified_gmt":"2021-08-19T08:52:54","slug":"this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20","status":"publish","type":"post","link":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/","title":{"rendered":"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20"},"content":{"rendered":"<p>Open-source developer <a href=\"https:\/\/www.youtube.com\/channel\/UCeiphynHxjL2x0u_KNyz3rA\">Andreas M\u00fcller<\/a> has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints.<\/p>\n<p>Dubbed the 3D Print Colorizer, the project is essentially a custom tool changer device that works in conjunction with Sharpie pens to produce multi-color parts on standard desktop 3D printers. The attachment is capable of picking up and utilizing up to seven Sharpie pens after every printed layer, coloring the printed parts in mid-build. This means that up to seven colors can be packed into every model, paving the way for rainbow prints with just one white filament.<\/p>\n<p>Designed to be as accessible as possible, the 3D Print Colorizer only requires a few pieces of 3D printable hardware such as a pen rack and printhead attachment (<a href=\"https:\/\/github.com\/Sakati84\/3DPrintColorizer\">STLs available here<\/a>). Apart from the cost of the filament, the only other expense of the project is the Sharpie set \u2013 this should cost no more than around $20.<\/p>\n<p><iframe title=\"Free Multi Color Printing on Ender 3 without special Hardware\" width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/2vPkmsyEDaQ?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe><\/p>\n<p><strong>Options for multi-color 3D printing<\/strong><\/p>\n<p>Those seeking multi-color 3D printing on an FFF system have a few different options. The first and most obvious is to go for a purpose-built dual extrusion 3D printer like the Kodak Portrait, or even an IDEX machine like the BCN3D Sigma D25. By offering two individual hotends, these systems allow two different filaments to be loaded simultaneously for multi-color and multi-material part production. Naturally, dual extruders tend to cost more than their single counterparts so if the budget is an issue or you already have a single extruder at home, the add-on route may be more viable.<\/p>\n<p><a href=\"https:\/\/www.mosaicmfg.com\/\">Mosaic Manufacturing<\/a>, formed in 2014 by five Canadian college students, rose to prominence for its modular approach to multi-color 3D printing. The company\u2019s flagship Palette system is a multi-material filament switching add-on device, and it works by attaching to conventional single extruder systems to switch between up to eight filaments at a time. This upstream option offers a standalone method of achieving multi-color prints.<\/p>\n<p>Similarly, <a href=\"https:\/\/www.prusa3d.com\/\">Prusa Research<\/a> has also gone down the add-on route in the past, launching multi-material kits for its existing 3D printers. The Multi-Material Upgrade 2.0 (MMU2) is priced at around $300 and enables Prusa systems to print with up to five colors at the same time.<\/p>\n<figure id=\"attachment_181979\" aria-describedby=\"caption-attachment-181979\" style=\"width: 500px\" class=\"wp-caption aligncenter\"><img fetchpriority=\"high\" decoding=\"async\" class=\"size-full wp-image-181979\" src=\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif\" alt=\"\" width=\"500\" height=\"338\" \/><figcaption id=\"caption-attachment-181979\" class=\"wp-caption-text\">The 3D Print Colorizer in action. GIF via Andreas M\u00fcller.<\/figcaption><\/figure>\n<p><strong>The 3D Print Colorizer<\/strong><\/p>\n<p>As great as these commercial options are, we can go even cheaper down the open-source route. The 3D Print Colorizer utilizes a <a href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\">Cura<\/a> plugin that requires the user to set up around half a dozen parameters. Then, it\u2019s just a matter of loading in a multi-material model and assigning the colors in the plugin to the Sharpie colors set up in the 3D printed tool rack. It\u2019s recommended that white or transparent PLA is used as the base material, as these are the easiest to color in using Sharpies.<\/p>\n<p>This certainly isn\u2019t the cleanest or most advanced system when it comes to achieving multi-color 3D printing, but it\u2019s an extremely clever use of G-code and requires no additional third-party hardware or firmware changes. Ultimately, if costs are a limitation or you\u2019re looking for a simple and easy way to get into multi-color 3D printing, the 3D Print Colorizer may be a great place to start.<\/p>\n<p><a href=\"https:\/\/github.com\/Sakati84\/3DPrintColorizer\">All of the necessary STLs, software files, and instructions for the 3D Print Colorizer can be found here.<\/a><\/p>\n<figure style=\"width: 700px\" class=\"wp-caption aligncenter\"><img decoding=\"async\" src=\"https:\/\/img.facfox.com\/imgs\/2021\/08\/1ec12ad0305764c3.png\" alt=\"\" width=\"700\" height=\"197\" \/><figcaption class=\"wp-caption-text\">Multi-color models 3D printed using the 3D Print Colorizer. Photo via Andreas M\u00fcller.<\/figcaption><\/figure>\n<p>Source: Kubi Sertoglu<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints. Dubbed the 3D Print Colorizer, the project is essentially a custom tool changer device that works in conjunction with Sharpie pens to produce multi-color parts on standard desktop 3D printers. The attachment is capable [&hellip;]<\/p>\n","protected":false},"author":3,"featured_media":181979,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[94],"tags":[215,24,243,488],"class_list":["post-181977","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-applications","tag-3d-model","tag-3d-printing","tag-fff","tag-multi-color"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.2 (Yoast SEO v27.2) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20 - FacFox News<\/title>\n<meta name=\"description\" content=\"Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints. Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20\" \/>\n<meta property=\"og:description\" content=\"Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints. Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/\" \/>\n<meta property=\"og:site_name\" content=\"FacFox News\" \/>\n<meta property=\"article:published_time\" content=\"2021-08-19T08:52:54+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif\" \/>\n\t<meta property=\"og:image:width\" content=\"500\" \/>\n\t<meta property=\"og:image:height\" content=\"338\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/gif\" \/>\n<meta name=\"author\" content=\"Vera\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Vera\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/\"},\"author\":{\"name\":\"Vera\",\"@id\":\"https:\/\/facfox.com\/news\/#\/schema\/person\/7b701aad2d8f434034fcecd2c50a570c\"},\"headline\":\"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20\",\"datePublished\":\"2021-08-19T08:52:54+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/\"},\"wordCount\":607,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/facfox.com\/news\/#organization\"},\"image\":{\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif\",\"keywords\":[\"3d model\",\"3d printing\",\"FFF\",\"multi-color\"],\"articleSection\":[\"Applications\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/\",\"url\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/\",\"name\":\"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20 - FacFox News\",\"isPartOf\":{\"@id\":\"https:\/\/facfox.com\/news\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif\",\"datePublished\":\"2021-08-19T08:52:54+00:00\",\"description\":\"Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints. Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints.\",\"breadcrumb\":{\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#primaryimage\",\"url\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif\",\"contentUrl\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif\",\"width\":500,\"height\":338,\"caption\":\"Options for multi-color 3D printing Those seeking multi-color 3D printing on an FFF system have a few different options. The first and most obvious is to go for a purpose-built dual extrusion 3D printer like the Kodak Portrait, or even an IDEX machine like the BCN3D Sigma D25. By offering two individual hotends, these systems allow two different filaments to be loaded simultaneously for multi-color and multi-material part production. Naturally, dual extruders tend to cost more than their single counterparts so if the budget is an issue or you already have a single extruder at home, the add-on route may be more viable. Mosaic Manufacturing, formed in 2014 by five Canadian college students, rose to prominence for its modular approach to multi-color 3D printing. The company\u2019s flagship Palette system is a multi-material filament switching add-on device, and it works by attaching to conventional single extruder systems to switch between up to eight filaments at a time. This upstream option offers a standalone method of achieving multi-color prints. Similarly, Prusa Research has also gone down the add-on route in the past, launching multi-material kits for its existing 3D printers. The Multi-Material Upgrade 2.0 (MMU2) is priced at around $300 and enables Prusa systems to print with up to five colors at the same time.\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/facfox.com\/news\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/facfox.com\/news\/#website\",\"url\":\"https:\/\/facfox.com\/news\/\",\"name\":\"FacFox News\",\"description\":\"News and Insights of 3D Printing and Manufacturing\",\"publisher\":{\"@id\":\"https:\/\/facfox.com\/news\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/facfox.com\/news\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/facfox.com\/news\/#organization\",\"name\":\"FacFox News\",\"url\":\"https:\/\/facfox.com\/news\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/facfox.com\/news\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2020\/11\/facfox-news-homepg-logo-200px.png\",\"contentUrl\":\"https:\/\/facfox.com\/news\/wp-content\/uploads\/2020\/11\/facfox-news-homepg-logo-200px.png\",\"width\":200,\"height\":55,\"caption\":\"FacFox News\"},\"image\":{\"@id\":\"https:\/\/facfox.com\/news\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/facfox.com\/news\/#\/schema\/person\/7b701aad2d8f434034fcecd2c50a570c\",\"name\":\"Vera\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g\",\"caption\":\"Vera\"},\"url\":\"https:\/\/facfox.com\/news\/author\/vera\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20 - FacFox News","description":"Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints. Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/","og_locale":"en_US","og_type":"article","og_title":"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20","og_description":"Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints. Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints.","og_url":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/","og_site_name":"FacFox News","article_published_time":"2021-08-19T08:52:54+00:00","og_image":[{"url":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif","width":500,"height":338,"type":"image\/gif"}],"author":"Vera","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Vera","Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#article","isPartOf":{"@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/"},"author":{"name":"Vera","@id":"https:\/\/facfox.com\/news\/#\/schema\/person\/7b701aad2d8f434034fcecd2c50a570c"},"headline":"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20","datePublished":"2021-08-19T08:52:54+00:00","mainEntityOfPage":{"@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/"},"wordCount":607,"commentCount":0,"publisher":{"@id":"https:\/\/facfox.com\/news\/#organization"},"image":{"@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#primaryimage"},"thumbnailUrl":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif","keywords":["3d model","3d printing","FFF","multi-color"],"articleSection":["Applications"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/","url":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/","name":"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20 - FacFox News","isPartOf":{"@id":"https:\/\/facfox.com\/news\/#website"},"primaryImageOfPage":{"@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#primaryimage"},"image":{"@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#primaryimage"},"thumbnailUrl":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif","datePublished":"2021-08-19T08:52:54+00:00","description":"Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints. Open-source developer Andreas M\u00fcller has created a novel 3D printer attachment that enables single extruder FFF systems to produce multi-color prints.","breadcrumb":{"@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#primaryimage","url":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif","contentUrl":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2021\/08\/Animation.gif","width":500,"height":338,"caption":"Options for multi-color 3D printing Those seeking multi-color 3D printing on an FFF system have a few different options. The first and most obvious is to go for a purpose-built dual extrusion 3D printer like the Kodak Portrait, or even an IDEX machine like the BCN3D Sigma D25. By offering two individual hotends, these systems allow two different filaments to be loaded simultaneously for multi-color and multi-material part production. Naturally, dual extruders tend to cost more than their single counterparts so if the budget is an issue or you already have a single extruder at home, the add-on route may be more viable. Mosaic Manufacturing, formed in 2014 by five Canadian college students, rose to prominence for its modular approach to multi-color 3D printing. The company\u2019s flagship Palette system is a multi-material filament switching add-on device, and it works by attaching to conventional single extruder systems to switch between up to eight filaments at a time. This upstream option offers a standalone method of achieving multi-color prints. Similarly, Prusa Research has also gone down the add-on route in the past, launching multi-material kits for its existing 3D printers. The Multi-Material Upgrade 2.0 (MMU2) is priced at around $300 and enables Prusa systems to print with up to five colors at the same time."},{"@type":"BreadcrumbList","@id":"https:\/\/facfox.com\/news\/this-open-source-multi-color-3d-printing-add-on-can-be-built-for-less-than-20\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/facfox.com\/news\/"},{"@type":"ListItem","position":2,"name":"This Open-source Multi-color 3D Printing Add-on Can Be Built for Less than $20"}]},{"@type":"WebSite","@id":"https:\/\/facfox.com\/news\/#website","url":"https:\/\/facfox.com\/news\/","name":"FacFox News","description":"News and Insights of 3D Printing and Manufacturing","publisher":{"@id":"https:\/\/facfox.com\/news\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/facfox.com\/news\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/facfox.com\/news\/#organization","name":"FacFox News","url":"https:\/\/facfox.com\/news\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/facfox.com\/news\/#\/schema\/logo\/image\/","url":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2020\/11\/facfox-news-homepg-logo-200px.png","contentUrl":"https:\/\/facfox.com\/news\/wp-content\/uploads\/2020\/11\/facfox-news-homepg-logo-200px.png","width":200,"height":55,"caption":"FacFox News"},"image":{"@id":"https:\/\/facfox.com\/news\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/facfox.com\/news\/#\/schema\/person\/7b701aad2d8f434034fcecd2c50a570c","name":"Vera","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/bf3b1e47e1f0ed2367da10e343584d5a4adb2e9675fce2aefb04f0ecf3954386?s=96&d=mm&r=g","caption":"Vera"},"url":"https:\/\/facfox.com\/news\/author\/vera\/"}]}},"_links":{"self":[{"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/posts\/181977","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/comments?post=181977"}],"version-history":[{"count":2,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/posts\/181977\/revisions"}],"predecessor-version":[{"id":186443,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/posts\/181977\/revisions\/186443"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/media\/181979"}],"wp:attachment":[{"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/media?parent=181977"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/categories?post=181977"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/facfox.com\/news\/wp-json\/wp\/v2\/tags?post=181977"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}