{"id":164620,"date":"2022-04-11T17:22:00","date_gmt":"2022-04-11T09:22:00","guid":{"rendered":"https:\/\/facfox.com\/docs\/?post_type=kb&p=164620"},"modified":"2022-05-13T09:46:15","modified_gmt":"2022-05-13T01:46:15","slug":"sub-surface-3d-laser-engraving-a-brief-explanation","status":"publish","type":"kb","link":"https:\/\/facfox.com\/docs\/kb\/sub-surface-3d-laser-engraving-a-brief-explanation","title":{"rendered":"Sub-Surface 3D Laser Engraving: A Brief Explanation"},"content":{"rendered":"

Today I will dive into physics and explain how so-called\u00a0‘Bubblegrams’<\/strong> are made. Probably everybody has already seen some of them, but have a look at the following intriguing examples, produced by a technology called:<\/p>\n

Sub-Surface Laser Engraving (SSLE)<\/h2>\n

<\/p>\n

The basis for this technology is the same as for ordinary laser engraving on the surface of stones or glasses. Due to a very strong local temperature gradient, the material treated with the laser beam experiences thermal stress, resulting in\u00a0small localized fractures<\/strong>.<\/p>\n

This gives you directly perceptible breaks in stones and in engraved glasses or crystals, these micro-fractures are even more pronounced due to visible light, which scatters on them. Now how are sub-surface images made?<\/p>\n

For this purpose, the lenses of the laser system are tuned to move the focal point from the surface to a spot within the material to be processed. So the difference can basically be found in a z-offset.<\/p>\n

\"\"
Illustration of the SSLE principle<\/figcaption><\/figure>\n

In order to be able to actually produce internal micro-fractures with lasers inside a material, it must present an essential property, which is high optical transparency. Hence only high-grade optical materials with very low dispersion are applicable. Examples are\u00a0Schott BK7<\/strong>\u00a0or\u00a0K9 borosilicate glass<\/strong>.<\/p>\n

The structures to be depicted in the crystal are transferred into some kind of point cloud, which is then reproduced within the sample volume by the described 3D laser engraving technology.<\/p>\n

The accuracy with which these local breaks or bubbles can be generated is on the order of a\u00a0few micrometers<\/strong>\u00a0(<100\u03bcm). Also, the size of the generated inhomogeneities is typically in the region of tenths of a millimeter.<\/p>\n

<\/p>\n

The technology was available from the\u00a01980-1990’s<\/strong>\u00a0on, hence is not really new, but the machines are quite costly and therefore not very common. Prices for these machines are at least in the five-digit range. The laser diode, which is the primary component and excites the pulsed solid-state laser, can easily cost a third of the machine itself and has a limited lifetime. This is one of the reasons why the\u00a0SSLE technology<\/strong>\u00a0works in a\u00a0pulsed fashion<\/strong>.<\/p>\n

They are often used to recreate\u00a0characteristic landscapes<\/strong>\u00a0or\u00a0city features<\/strong>\u00a0as commercial souvenirs for tourists. Meanwhile, even normal portrait photos can be converted into\u00a03D rendered images<\/strong>\u00a0by rather simple processing and can then be imprinted into the crystal. The presentation of scientific measurement data (e.g.\u00a0MRI organscans<\/strong>) can also use the SSLE technology.<\/p>\n

<\/p>\n

Typical SSLE Characteristics<\/h2>\n
    \n
  • In order to avoid damaging the whole crystal body or to unduly stress the life of the diode and also due to the necessity of transparency of the final object only ordered point clouds and no continuous breaks are generated by a pulsed laser.<\/li>\n
  • The SSLE technology do not allow for coloration. However, since the microfractures are particularly accentuated by stray light, the final object can be illuminated with colored light and thus become\u00a0‘colored’<\/strong>.<\/li>\n
  • Since the size of the points is fixed, this parameter can not be used to create some kind of gray scale. However, the\u00a0dot density<\/strong>\u00a0within a region can be used for a linear scale.<\/li>\n
  • There is an\u00a0upper limit to the dot density<\/strong>, because if the individual micro-fractures are too close to each other, so-called ‘clashes’ form. Clashes are larger fracture edges formed from unified microfractures.<\/li>\n
  • And finally, if the\u00a0dot denisty is too low<\/strong>, the object appears quite faint and can hardly be seen.<\/li>\n<\/ul>\n

    For those who want to see how fast and precise the 3D laser engraving machine performs the SSLE process, have a look at this visual sample!<\/p>\n