{"id":162347,"date":"2021-01-21T08:36:33","date_gmt":"2021-01-21T08:36:33","guid":{"rendered":"http:\/\/facfox.com\/docs\/?post_type=kb&p=162347"},"modified":"2021-01-21T08:36:33","modified_gmt":"2021-01-21T08:36:33","slug":"post-processing-pla-and-abs-prints","status":"publish","type":"kb","link":"https:\/\/facfox.com\/docs\/kb\/post-processing-pla-and-abs-prints","title":{"rendered":"Post Processing PLA and ABS Prints!"},"content":{"rendered":"

In an ideal world, 3D prints would all come out of our printers ready to go. But, as anyone with a 3D printer knows, this is not always the case, and at some point, most of us will find ourselves trying to seamlessly remove supports from our prints without leaving an uneven surface on our prints. We\u2019ve got some tips on how to avoid the struggle of removing supports and fly-away material to help in post-processing PLA and ABS 3D prints.<\/p>\n

\"\"
Above: Post-processing of FDM 3D printed parts with Acetone Vapour Smoothening\/Image Credit: Pinshape<\/figcaption><\/figure>\n

1. Minimize Supports<\/strong><\/h2>\n

The first step in dealing with supports actually comes before you start printing, in your slicer software. Whenever you\u2019re setting your slicer settings and orienting your print, pay attention to which orientation will take the most supports, and then avoid<\/i> that orientation. Your goal is to minimize the amount of supports, and subsequently the amount of work that you need to do while post-processing PLA and ABS 3D prints.<\/p>\n

2. Assess Your Material<\/strong><\/h2>\n

How you post-process your prints are based on which material you used to 3D print your designs, so your next steps will depend on what your chosen printing material is. This is a good thing to keep in mind whenever you\u2019re planning your 3D print, since different processing methods, take different amounts of time and you\u2019ll have to have different tools on hand depending on whether you\u2019ll be post-processing PLA, ABS, or something else.<\/p>\n

3. Take Safety Precautions<\/strong><\/h2>\n

It is important to note, that although appropriate for at-home use, both chemicals used to smooth your prints are relatively toxic. As a result, make sure to be careful whenever working with these chemicals. You should only use these materials in a well-ventilated area<\/i> and wear gloves<\/i>. Make sure that your gloves are non-latex (nitrile or neoprene gloves are fine) \u2013 the THF will eat through latex gloves.<\/p>\n

It\u2019s also important to note that we do not <\/i>suggest this method post-processing PLA and ABS for prints that will come into contact with food or prints that will be used by young children who may place the print or their hands in their mouth, as ingesting even trace amounts of these compounds could be dangerous.<\/p>\n

4a. Post Processing ABS<\/strong><\/h2>\n

One of the easiest, and most effective, ways to smooth your ABS plastic is with acetone vapor.<\/p>\n

\"\"<\/p>\n

What you\u2019ll need:<\/strong><\/p>\n

1. Paper Towels<\/p>\n

2. Acetone<\/p>\n

3. Tin Foil<\/p>\n

4. Sealable Container<\/p>\n

To smooth your print:<\/strong><\/p>\n

    \n
  1. Remove any excess material that you can from your print.<\/li>\n
  2. Place paper towels around all four sides of a plastic container.<\/li>\n
  3. In a well-ventilated area, sprinkle a small amount of acetone in the bottom of the container, and cover the bottom of your container with tin foil.<\/li>\n
  4. Place your 3D print in the container, and allow to sit for several hours \u2013 until the print has smoothed to your liking.<\/li>\n
  5. Remove your print, and allow it to sit for several minutes to allow the acetone to evaporate off of your print.<\/li>\n
  6. Your print is smoothed ready for display!<\/li>\n<\/ol>\n