{"id":162094,"date":"2020-12-02T02:06:25","date_gmt":"2020-12-02T02:06:25","guid":{"rendered":"http:\/\/facfox.com\/docs\/?post_type=kb&p=162094"},"modified":"2020-12-02T02:06:25","modified_gmt":"2020-12-02T02:06:25","slug":"how-to-prevent-gaps-in-floor-corners","status":"publish","type":"kb","link":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners","title":{"rendered":"How to Prevent Gaps in Floor Corners?"},"content":{"rendered":"
\n
\n
\n
\n
\n

When building a 3D printed part, each layer relies on the foundation from the layer below. However, the amount of plastic that is used for the print is also a concern, so a balance must be achieved between the strength of the foundation and the amount of plastic that is used. If the foundation is not strong enough, you will start to see holes and gaps between the layers. This is typically most obvious in the corners, where the size of the part is changing (for example, if you were printing a 20mm cube on top of a 40mm cube). When you transition to the smaller size, you need to make sure that you have a sufficient foundation to support the sidewalls of the 20mm cube. There are several typical causes for these weak foundations. We will discuss each one below and present the settings that can be used in Simplify3D to improve the print.<\/p>\n

<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
\n
\n

Common Solutions<\/h2>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n
\n

Not enough perimeters<\/h3>\n<\/div>\n<\/div>\n
\n
\n

Adding more outline perimeters to your part will greatly improve the strength of the foundation. Because the interior of your part is typically partially hollow, the thickness of the perimeter walls has a significant effect. To adjust this setting, click \u201cEdit Process Settings\u201d and click on the Layer tab. For example, if you were previously printing with two perimeters, try the same print with four perimeters to see if the gaps disappear.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

\n
\n
\n
\n

Not enough top solid layers<\/h3>\n<\/div>\n<\/div>\n
\n
\n

Another common cause for a weak foundation is not having enough solid layers for the top surfaces of your print. A thin ceiling will not be able to adequately support the structures that are printed on top of them. This setting can be adjusted by clicking \u201cEdit Process Settings\u201d and selecting the Layer tab. If you were previously using only two top solid layers, try the same print with four top solid layers to see if the foundation is improved.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

\n
\n
\n
\n

Infill percentage is too low<\/h3>\n<\/div>\n<\/div>\n
\n
\n

The final setting you should check is the infill percentage used for your print, illustrated by a slider under the Process Settings or found under the Infill tab. The top solid layers will be built on top of the infill, so it is important that there is enough infill to support these layers. For example, if you were previously using a infill percentage of 20%, try increasing that value to 40% to see if the print quality improves.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n","protected":false},"excerpt":{"rendered":"

When building a 3D printed part, each layer relies on the foundation from the layer below. However, the amount of plastic that is used for the print is also a concern, so a balance must be achieved between the strength of the foundation and the amount of plastic that is used. If the foundation is […]<\/p>\n","protected":false},"author":4,"featured_media":162095,"comment_status":"open","ping_status":"closed","template":"","meta":{"footnotes":""},"kbtopic":[137],"kbtag":[130,126,392,388,203],"class_list":["post-162094","kb","type-kb","status-publish","has-post-thumbnail","hentry","kbtopic-case","kbtag-3d-printer","kbtag-3d-printing","kbtag-gaps","kbtag-problem","kbtag-solution"],"yoast_head":"\nHow to Prevent Gaps in Floor Corners? - FacFox Docs<\/title>\n<meta name=\"description\" content=\"When building a 3D printed part, each layer relies on the foundation from the layer below. However, the amount of plastic that is used for the print is\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Prevent Gaps in Floor Corners?\" \/>\n<meta property=\"og:description\" content=\"When building a 3D printed part, each layer relies on the foundation from the layer below. However, the amount of plastic that is used for the print is\" \/>\n<meta property=\"og:url\" content=\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners\" \/>\n<meta property=\"og:site_name\" content=\"FacFox Docs\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/facebook.com\/facfox3d\" \/>\n<meta property=\"og:image\" content=\"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/12\/Pasted-into-How-to-Prevent-Gaps-in-Floor-Corners.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1024\" \/>\n\t<meta property=\"og:image:height\" content=\"1024\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:site\" content=\"@facfox3d\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners\",\"url\":\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners\",\"name\":\"How to Prevent Gaps in Floor Corners? - FacFox Docs\",\"isPartOf\":{\"@id\":\"https:\/\/facfox.com\/docs\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#primaryimage\"},\"image\":{\"@id\":\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#primaryimage\"},\"thumbnailUrl\":\"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/12\/Pasted-into-How-to-Prevent-Gaps-in-Floor-Corners.png\",\"datePublished\":\"2020-12-02T02:06:25+00:00\",\"description\":\"When building a 3D printed part, each layer relies on the foundation from the layer below. However, the amount of plastic that is used for the print is\",\"breadcrumb\":{\"@id\":\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#primaryimage\",\"url\":\"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/12\/Pasted-into-How-to-Prevent-Gaps-in-Floor-Corners.png\",\"contentUrl\":\"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/12\/Pasted-into-How-to-Prevent-Gaps-in-Floor-Corners.png\",\"width\":1024,\"height\":1024},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/facfox.com\/docs\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Prevent Gaps in Floor Corners?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/facfox.com\/docs\/#website\",\"url\":\"https:\/\/facfox.com\/docs\/\",\"name\":\"FacFox Docs\",\"description\":\"Knowledgebase of manufacturing\",\"publisher\":{\"@id\":\"https:\/\/facfox.com\/docs\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/facfox.com\/docs\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/facfox.com\/docs\/#organization\",\"name\":\"FACFOX,INC.\",\"url\":\"https:\/\/facfox.com\/docs\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/facfox.com\/docs\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/11\/foxdoc-favicon.png\",\"contentUrl\":\"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/11\/foxdoc-favicon.png\",\"width\":132,\"height\":133,\"caption\":\"FACFOX,INC.\"},\"image\":{\"@id\":\"https:\/\/facfox.com\/docs\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/facebook.com\/facfox3d\",\"https:\/\/x.com\/facfox3d\",\"https:\/\/instagram.com\/facfox3d\"]}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"How to Prevent Gaps in Floor Corners? - FacFox Docs","description":"When building a 3D printed part, each layer relies on the foundation from the layer below. However, the amount of plastic that is used for the print is","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners","og_locale":"en_US","og_type":"article","og_title":"How to Prevent Gaps in Floor Corners?","og_description":"When building a 3D printed part, each layer relies on the foundation from the layer below. However, the amount of plastic that is used for the print is","og_url":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners","og_site_name":"FacFox Docs","article_publisher":"https:\/\/facebook.com\/facfox3d","og_image":[{"width":1024,"height":1024,"url":"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/12\/Pasted-into-How-to-Prevent-Gaps-in-Floor-Corners.png","type":"image\/png"}],"twitter_card":"summary_large_image","twitter_site":"@facfox3d","twitter_misc":{"Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners","url":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners","name":"How to Prevent Gaps in Floor Corners? - FacFox Docs","isPartOf":{"@id":"https:\/\/facfox.com\/docs\/#website"},"primaryImageOfPage":{"@id":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#primaryimage"},"image":{"@id":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#primaryimage"},"thumbnailUrl":"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/12\/Pasted-into-How-to-Prevent-Gaps-in-Floor-Corners.png","datePublished":"2020-12-02T02:06:25+00:00","description":"When building a 3D printed part, each layer relies on the foundation from the layer below. However, the amount of plastic that is used for the print is","breadcrumb":{"@id":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#primaryimage","url":"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/12\/Pasted-into-How-to-Prevent-Gaps-in-Floor-Corners.png","contentUrl":"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/12\/Pasted-into-How-to-Prevent-Gaps-in-Floor-Corners.png","width":1024,"height":1024},{"@type":"BreadcrumbList","@id":"https:\/\/facfox.com\/docs\/kb\/how-to-prevent-gaps-in-floor-corners#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/facfox.com\/docs\/"},{"@type":"ListItem","position":2,"name":"How to Prevent Gaps in Floor Corners?"}]},{"@type":"WebSite","@id":"https:\/\/facfox.com\/docs\/#website","url":"https:\/\/facfox.com\/docs\/","name":"FacFox Docs","description":"Knowledgebase of manufacturing","publisher":{"@id":"https:\/\/facfox.com\/docs\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/facfox.com\/docs\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/facfox.com\/docs\/#organization","name":"FACFOX,INC.","url":"https:\/\/facfox.com\/docs\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/facfox.com\/docs\/#\/schema\/logo\/image\/","url":"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/11\/foxdoc-favicon.png","contentUrl":"https:\/\/facfox.com\/docs\/wp-content\/uploads\/2020\/11\/foxdoc-favicon.png","width":132,"height":133,"caption":"FACFOX,INC."},"image":{"@id":"https:\/\/facfox.com\/docs\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/facebook.com\/facfox3d","https:\/\/x.com\/facfox3d","https:\/\/instagram.com\/facfox3d"]}]}},"_links":{"self":[{"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/kb\/162094","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/kb"}],"about":[{"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/types\/kb"}],"author":[{"embeddable":true,"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/comments?post=162094"}],"version-history":[{"count":1,"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/kb\/162094\/revisions"}],"predecessor-version":[{"id":162096,"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/kb\/162094\/revisions\/162096"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/media\/162095"}],"wp:attachment":[{"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/media?parent=162094"}],"wp:term":[{"taxonomy":"kbtopic","embeddable":true,"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/kbtopic?post=162094"},{"taxonomy":"kbtag","embeddable":true,"href":"https:\/\/facfox.com\/docs\/wp-json\/wp\/v2\/kbtag?post=162094"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}